FIBARO Wall plug F
The ultimate Z-Wave power socket - control and monitor any appliance wirelessly.
Wireless Z-Wave On/Off control of any appliance
Beautiful colour LED ring tells you how much power is being used
Monitor and analyse energy usage
Integrated Z-Wave network range tester
Fibaro Wall plug
The Fibaro Z-Wave Wall plug enables you to wirelessly control any appliance connected to it.
But that's only part of the story.
This ultimate wall plug also shows you how much power is being used, allows you to measure power consumption across days and weeks, and can test the range of your Z-Wave network.
Plug & Play
Simply plug the Fibaro Wall Plug into any electrical outlet, connect an appliance to it, then add it to you Z-Wave network by pressing the 'B' button socket. That's all it takes.
The wall plug features a beautiful full colour crystal LED ring that gives you a visual indication of how much power the appliance is using. The LED ring changes colour depending on how much power is being consumed, starting with blue and moving through green, red and finally violet. It can even send an alarm if the power consumption goes above a preset limit.
The wall plug provides a real-time report of energy usage to your Z-Wave central controller. You can see how much power is being used and make decisions on how to save energy (and money), you can also look at historical information, display them in charts and look at your top-5 power hungry appliances.
Z-Wave Network Range Tester
The FIBARO Wall Plug has a unique feature of being able to test the coverage of your Z-Wave network.
Simply press the button on the plug’s casing for a few seconds. The LED's purple light informs you that the plug is in testing mode, after a few seconds the LED will change colour telling you the Z-Wave converge at that point in your network.
Currently the Fibaro Wall Plug is available in Schuko and French/Belgium socket styles. Until the UK version of the wall plug is available, all UK customers will receive a FREE Schuko to UK adapter enabling you to use it with UK style wall sockets.
Power Source 220-240V AC ±10% 50/60Hz,
Rated operational output voltage: 11A/230V AC 50/60Hz - continuous load,
Power consumption: up to 1.6W,
Output power for resistive loads: 2.5 kW continuous load,
In accordance with UE standards: EN 55015 (noise), EN 60669-2-1 (operational safety), RoHS 2011/65/EU, LVD 2006/95/EC, EMC 2004/108/EC, R&TTE 1999/5/EC
Circuit temperature limit: 105°C,
Operational temperature: 0 - 40 °C,
For use with sockets (Compatible with each EU plug: - CEE 7/16 - max load. 2.5A; - CEE 7/17 - max load 16A; - and dual type plugs E/F),
Radio protocol: Z-Wave Plus,
Radio frequency: 868.42 MHz MHz EU
Antenna range: up to 50 m outdoors / up to 40 m indoors (depending on building materials),
Dimensions (D x H): 43 x 65 mm.